Photocake: Manufacturers of Icingsheet, Photo cake Products, Frosting Sheet

| Tech Tips on BCI-24 Color | Tech Tips on BCI-24 Black | Tech Tips on BCI-3 |

Tech. Tips Compatible CANON Printers : S300, xnu i320 ...contd

1.After following all instructions that were provided with our ink refill kit as instructed, it may be necessary to clean the print head if your printer ink cartridge is not printing as desired when printing all three colors Cyan Magenta Yellow . This can be done by pouring hot distilled water into a cup or dish approximately 1/4" deep. It is important NOT to get any water into the printer ink cartridge itself. After removing the BCI-24 color tank from the cartridge, place the "Print-Head" (Bottom portion of the ink canon ink cartridge where the ink exits the ink cartridge) in the HOT distilled water and let soak for 1 minute. You will see the water solution start to cloud as the Cyan Magenta Yellow or combination of any ink is heated and released from the ink cartridge.
2.You will then need to place a dry paper towel in the palm of your hand. Then place the print head of the ink cartridge into the paper towel and hold it there for a few seconds. Remove the paper towel from the cartridge. You should see three narrow lines (one cyan, one magenta, one yellow), where the print head was blotted on the paper towel. You may need to repeat this step as many times as necessary till you see the three solid lines. After you see three solid lines, your canon printer ink cartridge should be ready to install into your printer and be ready to print.
3.After you have completed step 2 and your printer ink cartridge is still not producing the proper test results on the printer ink cartridge blot test you will need to ensure that the cartridge is completely filled. Make sure that you filled the canon BCI-24 printer ink cartridge with the correct number of CC's for each color as shown on your directions. Each ink cartridge MUST have the precise amount of ink injected into the printer ink cartridge when refilling in order for the pressure of the ink cartridge to balance out or the ink sponge to be saturated properly. It may be necessary to remove the ink already injected by using your syringe to draw the ink back out of the canon BCI-24 ink tank and re-inject the proper amount of ink into the cartridge again.

Photocake Icing Sheets/ Photocake Frosting sheets: Made from the finest quality food ingredients.
Our Photocake edible sheets produce the perfect crystal clear printouts for memorable photocake presentation.