Photocake: Manufacturers of Icingsheet, Photo cake Products, Frosting Sheet

Refilling BCI-24 Black : contd..
MAKING THE CARTRIDGE READY FOR REFILLING :
Clean the cartridge of any free ink spread at the bottom of the ink outlet / vent hole. BOTTOM refill process is the safest and can be easily done. weigh the cartridge and note down the weight on a piece of paper. Calculate the ml of ink required.

IDENTIFYING THE VENT HOLE :
The BCI-24 Black compatible cartridge has single vent hole at the bottom part of the cartridge. Cartridge's with less or no ink will develop a small white dry spot in the centre of the sponge. The bigger the size implies dry the cartridge is. So fill up the cartridge before the sponge completely dries up.

NJECTING THE INK :
Have the hole you are filling slightly angled as shown in the picture next. Black can only take about 5 ml when empty, so don't expect much. Place the needle all the way close to the sponge in the vent hole.
NOTE: Don't pierce the needle in to the Sponge.
Inject S-L-O-W-L-Y to fill the entire cartridge. As the sponge gets filled up ink will take while to get into the cartridge. Stop filling when ink droplets on the sponge take more time to absorb.
Set on a paper towel for an hour as a drip precaution. Expect a few drips. Cover all holes during storage to prevent leaks and evaporation by replacing the CAP.
Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.

TEST PRINT Page If the cartridge leaves bands on printing follow the instructions :Tech Tips on BCI-24 Black

Photocake Icing Sheets/ Photocake Frosting sheets: Made from the finest quality food ingredients.
Our Photocake edible sheets produce the perfect crystal clear printouts for memorable photocake presentation.